RBIL61 - 386MAX v6.01

RBIL61 - 386MAX v6.01

INT 15 - SYSTEM - later PSIBM PS/2, any model/2s - DISABLE A20(Address line 20) The 80286 and higher CPUs allow addresses in real mode to extend slightly beyond the one megabyte mark, which causes an incompatibility with some older programs which expect such addresses to wrap back to the beginning of the address space. For complete compatibility with the 8088, newer machines thus contain circuitry which permits the twenty-first address line (A20) to be disabled. The CPU then effectively has only twenty address lines in real mode, just as the 8088 does, and addresses which would extend beyond the one megabyte mark wrap to the beginning of the address space. See also High Memory Area, Real Mode. GATE {#idx18589}

INT 15 - SYSTEM - later PSIBM PS/2, any model/2s - ENABLE A20(Address line 20) The 80286 and higher CPUs allow addresses in real mode to extend slightly beyond the one megabyte mark, which causes an incompatibility with some older programs which expect such addresses to wrap back to the beginning of the address space. For complete compatibility with the 8088, newer machines thus contain circuitry which permits the twenty-first address line (A20) to be disabled. The CPU then effectively has only twenty address lines in real mode, just as the 8088 does, and addresses which would extend beyond the one megabyte mark wrap to the beginning of the address space. See also High Memory Area, Real Mode. GATE {#idx18617}

INT 15 - SYSTEM - later PSIBM PS/2, any model/2s - GET A20(Address line 20) The 80286 and higher CPUs allow addresses in real mode to extend slightly beyond the one megabyte mark, which causes an incompatibility with some older programs which expect such addresses to wrap back to the beginning of the address space. For complete compatibility with the 8088, newer machines thus contain circuitry which permits the twenty-first address line (A20) to be disabled. The CPU then effectively has only twenty address lines in real mode, just as the 8088 does, and addresses which would extend beyond the one megabyte mark wrap to the beginning of the address space. See also High Memory Area, Real Mode. GATE STATUS {#idx18641}

INT 15 - SYSTEM - later PSIBM PS/2, any model/2s - QUERY A20(Address line 20) The 80286 and higher CPUs allow addresses in real mode to extend slightly beyond the one megabyte mark, which causes an incompatibility with some older programs which expect such addresses to wrap back to the beginning of the address space. For complete compatibility with the 8088, newer machines thus contain circuitry which permits the twenty-first address line (A20) to be disabled. The CPU then effectively has only twenty address lines in real mode, just as the 8088 does, and addresses which would extend beyond the one megabyte mark wrap to the beginning of the address space. See also High Memory Area, Real Mode. GATE SUPPORT {#idx18658}

INT 15 - Tandy??? - ??? {#idx24811}

INT 21 - DOS 2+ internal - "SYSVARS" - GET LIST OF LISTS {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx51257}{#idx51263}

INT 21 - LASTBYTE.SYS v1.19 - IOCTL - GET ??? TABLE {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx46673}

INT 21 - Qualitas 386MAX v6.01+ - SET STATE {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx48071}

INT 21 - Qualitas 386MAX v6.01+ - TURN 386MAX OFF {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx48050}

INT 21 - Qualitas 386MAX v6.01+ - TURN 386MAX ON {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx48061}

INT 2F - MS Windows 3.0, 386MAX v6.01 - GET ALIAS SELECTOR TO LDT {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx81476}

INT 31 - DPMIsee DOS Protected-Mode Interface 1.0+ - GET COPROCESSOR STATUS {protected mode} {#idx97638}

INT 31 - DPMIsee DOS Protected-Mode Interface 1.0+ - SET EMULATION {protected mode} {#idx97650}

INT 67 - QEMM-386 v4.23+ - INSTALLATION CHECK {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx115786}