RBIL61 - INT 2D

INT 17 - Enhanced Parallel Port (EPP) BIOS(Basic Input/Output System) A set of standardized calls giving low-level access to the hardware. The BIOS is the lowest software layer above the actual hardware and serves to insulate programs (and operating systems) which use it from the details of accessing the hardware directly. - INSTALLATION CHECK {#idx28717}

INT 21 - DR DOS 5.0+ internal - GET POINTER TO INTERNAL VARIABLE TABLE {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx50126}

INT 21 - PCMag PCMANAGE/DCOMPRES - INSTALLATION CHECK {#idx71317}

INT 2D - ALTERNATE MULTIPLEX INTERRUPT SPECIFICATION (AMIS) [v3.6] {#idx73765}{#idx73815}{#idx73816}{#idx73817}{#idx73818}{#idx73819}{#idx73820}{#idx73821}

INT 2D - AMIS v3.0+ - DETERMINE CHAINED INTERRUPTS {#idx74019}{#idx74035}{#idx74040}{#idx74042}{#idx74043}{#idx74044}{#idx74045}{#idx74046}{#idx74047}

INT 2D - AMIS v3.0+ - GET PRIVATE ENTRY POINT {#idx73937}{#idx73942}{#idx73945}{#idx73946}{#idx73947}{#idx73948}{#idx73949}{#idx73950}

INT 2D - AMIS v3.0+ - INSTALLATION CHECK {#idx73857}{#idx73861}{#idx73862}{#idx73863}{#idx73864}{#idx73865}{#idx73866}{#idx73889}{#idx73891}

INT 2D - AMIS v3.0+ - REQUEST POP-UP {#idx73995}{#idx74007}{#idx74010}{#idx74011}{#idx74012}{#idx74013}{#idx74014}{#idx74015}

INT 2D - AMIS v3.0+ - UNINSTALL {#idx73957}{#idx73980}{#idx73982}{#idx73983}{#idx73984}{#idx73985}{#idx73986}{#idx73987}

INT 2D - AMIS v3.5+ - GET HOTKEYS {#idx74057}{#idx74063}{#idx74066}{#idx74067}{#idx74068}{#idx74069}{#idx74070}{#idx74071}

INT 2D - AMIS v3.6 - GET DEVICE-DRIVER INFORMATION {#idx74104}{#idx74116}{#idx74121}{#idx74122}{#idx74123}{#idx74124}{#idx74125}{#idx74126}

INT 2D - Burnout Plus v3.00 - GET STATE/CONTROL INFORMATION {#idx74173}{#idx74179}{#idx74214}{#idx74221}

INT 2D - CDTSR - DISABLE POPUP {#idx74351}{#idx74355}{#idx74357}{#idx74359}

INT 2D - CDTSR - ENABLE POPUP {#idx74378}{#idx74382}{#idx74384}{#idx74386}

INT 2D - CDTSR - GET INTERNAL VARIABLE TABLE {#idx74247}{#idx74254}{#idx74256}{#idx74258}

INT 2D - CDTSR - REPROGRAM CDTSR {#idx74326}{#idx74332}{#idx74334}{#idx74336}

INT 2D - DAISY.SYS - BROADCAST: CHAIN RESCANNED {callout or callback} {#idx74508}

INT 2D - dLite 1.0+ - CHECK FOR dPressed FILE AND GET COMPRESSED SIZE {#idx74341}

INT 2D - dLite 1.0+ - CHECK FOR dPressed FILE AND GET ORIGINAL SIZE {#idx74306}

INT 2D - dLite 1.0+ - GET PARAMETER BLOCK ADDRESS {#idx74154}

INT 2D - DOS 2+ - RESERVED {#idx73755}{#idx73762}

INT 2D - DTown Utilities v1.40+ - EXTENDED API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. INSTALLATION CHECK {#idx74238}{#idx74242}{#idx74243}{#idx74244}

INT 2D - DTown Utilities v1.40+ - GET POP-UP HANDLER ADDRESS {#idx74459}{#idx74463}{#idx74464}{#idx74465}{#idx74466}

INT 2D - DTown Utilities v1.40+ - MEMORY VIEW SET ADDRESS {#idx74481}{#idx74488}{#idx74489}{#idx74490}{#idx74491}

INT 2D - DTown Utilities v1.40+ - MEMORY VIEW SET REFERENCE {#idx74494}{#idx74502}{#idx74503}{#idx74504}

INT 2D - DTown Utilities v1.40+ - POP UP {#idx74470}{#idx74476}{#idx74477}{#idx74478}

INT 2D - DTown Utilities v1.40+ - UTILITY INSTALLATION CHECK {#idx74319}{#idx74323}{#idx74324}

INT 2D - FREEVER - DISABLE TSR(Terminate and Stay Resident) A program which remains in memory after terminating in order to provide services to other programs or the user. The name comes from the name of the DOS function call used to remain in memory after termination. {#idx74414}{#idx74418}{#idx74420}{#idx74422}

INT 2D - FREEVER - ENABLE TSR(Terminate and Stay Resident) A program which remains in memory after terminating in order to provide services to other programs or the user. The name comes from the name of the DOS function call used to remain in memory after termination. {#idx74402}{#idx74406}{#idx74408}{#idx74410}

INT 2D - FREEVER - GET ORIGINAL DOS VERSION INFO {#idx74363}{#idx74369}{#idx74371}{#idx74373}

INT 2D - FREEVER - GET TaskMAX STATUS ATIBM PC AT INSTALLATION {#idx74438}{#idx74449}{#idx74451}{#idx74453}

INT 2D - FREEVER - GET TSR(Terminate and Stay Resident) A program which remains in memory after terminating in order to provide services to other programs or the user. The name comes from the name of the DOS function call used to remain in memory after termination. STATUS {#idx74425}{#idx74431}{#idx74433}{#idx74435}

INT 2D - FREEVER - SET VERSION NUMBERS {#idx74389}{#idx74394}{#idx74396}{#idx74398}

INT 2D - KEYBIT Lite v5+ - GET POINTER TO STATUS BYTE {#idx74270}{#idx74279}{#idx74292}{#idx74301}

INT 2D - RAMLIGHT v1.0 - GET MONITORING INFORMATION {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx74227}

INT 2D - RATSR 2.0+ - GET STATUS {#idx74136}{#idx74150}

INT 2F - BMB Compuscience Canada Utilities Interface - INSTALLATION CHECK {#idx74908}

INT 2F - FREEVER v1.0+ - INSTALLATION CHECK {#idx94665}{#idx94675}

INT 2F - Multiplex - NOTES {#idx74851}{#idx74857}

INT 2F - TesSeRact RAM-RESIDENT PROGRAM INTERFACE {#idx85548}

INT 2F - THELP v3.0 - INSTALLATION CHECK {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx92257}

INT 32 - NOISE.SYS 0.53 - API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. {#idx98354}

INT 32 - NOISE.SYS v0.55+ - GET DEVICE DRIVER HEADER {#idx98398}

INT 66 - MicroHelp Stay-Res Plus - ??? {#idx115544}

INT 66 - MicroHelp Stay-Res Plus - FIND PROGRAM NAME {#idx115567}

INT 66 - MicroHelp Stay-Res/Stay-Res Plus - UNINSTALL {#idx115557}

INT 7D - [obsoleted proposal] - ALTERNATE MULTIPLEX INTERRUPT {obsolete} {#idx123957}{#idx123960}

INT D8 - Screen Thief v1.00 - RELOCATED IRQ0 {#idx129289}

INT F1 - Common ISDN API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. (CAPI) v1.1 - "API-REGISTER" - INITIALIZE CAPI {#idx132049}

INT F1 - Common ISDN API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. (CAPI) v2.0 - "CAPI_REGISTER" - INITIALIZE CAPI {#idx132087}{#idx132112}