RBIL61 - ORIGINAL INT 13

RBIL61 - ORIGINAL INT 13

INT 21 - SMARTDRV.SYS v3.x only - IOCTL - GET CACHE STATUS {#idx46340}

INT 2F - DOS 3.2+ - SET DISK INTERRUPT HANDLER {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} {#idx78455}

INT 63 - Adaptec and OMTI controllers - DRIVE 0 DATA {#idx114016}

INT 67 - RM386 v6.00+ - GET INTERRUPT VECTORS {#idx116612}

INT 78 - ADP-60 IDE(Integrated Drive Electronics) A type of disk drive interface which essentially extends the PCIBM PC's expansion bus all the way to the drive and places the drive controller on the disk drive itself. See also ESDI. controller - ORIGINAL INT 13 {#idx122025}

INT 9C - VIRUS - "INT13" - ORIGINAL INT 13h VECTOR {#idx127641}

INT F2 - NetWare Remote BootTo start up the computer or operating system. The term "boot" is a contraction of "bootstrap", which in turn comes from the expression "to lift oneself by one's boot straps." The ROM BIOS on IBMInternational Busiuness Machines PCs and compatibles reads in the first sector of the disk, which contains a short (less than 500 bytes) program that reads in a portion of the operating system, which in turn reads in the remainder of the operating system. See also IPL. - ORIGINAL INT 13 {#idx132414}