I2C(also IIC; the "2" is superscripted) Inter-Integrated Circuit Bus -- A moderate-speed serial communications bus originally invented by Philips in the early 1980s for consumer-electronics applications, such as inter-chip communication in a television set or high-end stereo.	 The I2C bus has recently appeared on PCs in video capture boards and similar devices, as well as (surprisingly) SDRAM DIMMs (for the on-board serial EEPROM).  The ACCESS.bus is a derivative of the I2C bus which forms the physical layer of the Universal Serial Bus.	 Similary, the SMBus (System Management Bus) also uses I2C as its physical layer. 8Ah/01h - Philips TDA8366 - DECODER MODE / STATUS 2
SeeAlso: I2C(also IIC; the "2" is superscripted) Inter-Integrated Circuit Bus -- A moderate-speed serial communications bus originally invented by Philips in the early 1980s for consumer-electronics applications, such as inter-chip communication in a television set or high-end stereo.	 The I2C bus has recently appeared on PCs in video capture boards and similar devices, as well as (surprisingly) SDRAM DIMMs (for the on-board serial EEPROM).  The ACCESS.bus is a derivative of the I2C bus which forms the physical layer of the Universal Serial Bus.	 Similary, the SMBus (System Management Bus) also uses I2C as its physical layer. 8Ah/00h"TDA8366",I2C(also IIC; the "2" is superscripted) Inter-Integrated Circuit Bus -- A moderate-speed serial communications bus originally invented by Philips in the early 1980s for consumer-electronics applications, such as inter-chip communication in a television set or high-end stereo.	 The I2C bus has recently appeared on PCs in video capture boards and similar devices, as well as (surprisingly) SDRAM DIMMs (for the on-board serial EEPROM).  The ACCESS.bus is a derivative of the I2C bus which forms the physical layer of the Universal Serial Bus.	 Similary, the SMBus (System Management Bus) also uses I2C as its physical layer. 8Ah/02h"TDA8366"


Bitfields for TDA8366 Decoder Mode (write-only):
Bit(s)	Description	(Table I0048)
 7-6	field frequency
	00 auto-detect, 60 Hz when not synchronized
	01 60 Hz
	10 50 Hz
	11 auto-detect, 50 Hz when not synchronized
 5	de-interlace
 4	standby status
	0 standby
	1 normal
 3	disable synchronization mode
 2-0	color decoder mode (see #I0122)
Note:	when bits 7-6 are changed, a new frequency is only set when not
	  currently synchronized
SeeAlso: #I0104,#I0106,#I0121


Bitfields for TDA8366 Status 2 (read-only):
Bit(s)	Description	(Table I0049)
 7	"NDF" vertical output stage has failed
 6	"IN1" RGB(Red-Green-Blue) The color specification mechanism normally used in computer displays, where colors are separated into their primary-color components.  See also YUV. insertion (Pin24) is active
 5	reserved
 4	"IFI" video signal identified
 3-2	AFC output
	00 too low
	01 too high
	10 in window but below reference
	11 in window but above reference
 1-0	reserved
SeeAlso: #I0120,#I0105
Note:	!!!philips\2086.pdf p.14