INT 1A - PCI BIOS(Basic Input/Output System) A set of standardized calls giving low-level access to the hardware. The BIOS is the lowest software layer above the actual hardware and serves to insulate programs (and operating systems) which use it from the details of accessing the hardware directly. v2.0c+ - WRITE CONFIGURATION DWORDDoubleword; four bytes. Commonly used to hold a 32-bit segment:offset or selector:offset address. AX = B10Dh BH = bus number BL = device/function number (bits 7-3 device, bits 2-0 function) DI = register number (multiple of 4 less than 0100h) ECX = dword to write Return: CF clear if successful CF set on error AH = status (00h,87h) (see #00729) EAX, EBX, ECX, and EDX may be modified all other flags (except IF) may be modified Notes: this function may require up to 1024 byte of stack; it will not enable interrupts if they were disabled before making the call the meanings of BL and BH on entry were exchanged between the initial drafts of the specification and final implementation SeeAlso: AX=B10Ah,AX=B10Bh,AX=B10Ch,AX=B18Dh,INT 2F/AX=1684h/BX=304Ch