INT 14 - FOSSIL(Fido/Opus/Seadog Standard Interface Layer)  A standardized API for performing serial I/O, originally used by the Fido and Opus bulletin- board software and Seadog bulletin-board mailer, but now in wider use. - SET CURRENT CURSOR LOCATION
	AH = 11h
	DH = row
	DL = column
Return: nothing
Note:	this is the same as INT 10/AH=02h
SeeAlso: AH=12h"FOSSIL(Fido/Opus/Seadog Standard Interface Layer)  A standardized API for performing serial I/O, originally used by the Fido and Opus bulletin- board software and Seadog bulletin-board mailer, but now in wider use."
                                                                                

INT 14 - Digiboard DigiCHANNEL PCIBM PC/X* - CLEAR TRANSMIT BUFFER
	AH = 11h
	DX = port number (00h-03h) (04h-43h for XAPCM232.SYS)
Return: AH = status
	    00h successful
	    FFh error
SeeAlso: AH=09h"Digiboard",AH=10h"Digiboard"
                                                                                

INT 14 - PC-MOS/386 v5.01 $serial.sys v5.04 - DISABLE PORTIBM PC Portable (uses same BIOS as XT)
	AH = 11h
	DX = port number
Return: AL = status
	    00h successful
	    01h IRQ(Interrupt ReQuest) A hardware line connected to the interrupt controller chip which signals that a CPU interrupt should be generated. for port is shared
	    02h IRQ(Interrupt ReQuest) A hardware line connected to the interrupt controller chip which signals that a CPU interrupt should be generated. was reserved
SeeAlso: AH=04h"SERIAL",AH=05h"SERIAL",AH=12h"PC-MOS"