INT 15 - Advanced Power Management v1.2 - GET/SET/DISABLE RESUME TIMER AX = 5311h BX = device ID (see #00474) 0000h (APM BIOS(Basic Input/Output System) A set of standardized calls giving low-level access to the hardware. The BIOS is the lowest software layer above the actual hardware and serves to insulate programs (and operating systems) which use it from the details of accessing the hardware directly.) other reserved CL = function 00h disable Resume Timer 01h get Resume Timer 02h set Resume Timer CH = resume time, seconds (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) DL = resume time, minutes (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) DH = resume time, hours (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) SI = resume date (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.), high byte = month, low byte = day DI = resume date, year (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) Return: CF clear if successful ---if getting timer--- CH = resume time, seconds (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) DL = resume time, minutes (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) DH = resume time, hours (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) SI = resume date (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.), high byte = month, low byte = day DI = resume date, year (BCD(Binary Coded Decimal) A method of data storage where two decimal digits are stored in each byte, one in the upper four bits and the other in the lower four bits. Since only the values 0 through 9 are used in each half of a byte, BCD values can be read as decimal numbers on a hexadecimal display of memory or a file.) CF set on error AH = error code (03h,09h,0Ah,0Bh,0Ch,0Dh,86h) (see #00473) Notes: this function is supported via the INT 15, 16-bit protected mode, and 32-bit protected mode interfaces SeeAlso: AX=5300h,AX=5310h,AX=5312h,AX=5313h