INT 1A - PCMCIA Socket Services v1.00 - GET NUMBER OF ADAPTERS                  
	AH = 80h
Return: CF clear if successful
	    CX = 5353h ('SS') if Socket Services installed
		AL = number of adapters present (0-16)
	    AH destroyed
	CF set on error
	    AH = error code (see #00656)
SeeAlso: AH=83h"PCMCIA"


(Table 00656)
Values for PCMCIA error codes:
 01h	"BAD_ADAPTER" nonexistent adapter
 02h	"BAD_ATTRIBUTE" invalid attribute specified
 03h	"BAD_BASE" invalid system memory base address
 04h	"BAD_EDC" invalid EDC generator specified
 05h	"BAD_INDICATOR" invalid indicator specified
 06h	"BAD_IRQ" invalid IRQ(Interrupt ReQuest) A hardware line connected to the interrupt controller chip which signals that a CPU interrupt should be generated. channel specified
 07h	"BAD_OFFSET" invalid PCMCIA card offset specified
 08h	"BAD_PAGE" invalid page specified
 09h	"BAD_READ" unable to complete request
 0Ah	"BAD_SIZE" invalid window size specified
 0Bh	"BAD_SOCKET" nonexistent socket specified
 0Ch	"BAD_TECHNOLOGY" unsupported Card Technology for writes
 0Dh	"BAD_TYPE" unavailable window type specified
 0Eh	"BAD_VCC" invalid Vcc power level index specified
 0Fh	"BAD_VPP" invalid Vpp1 or Vpp2 power level index specified
 10h	"BAD_WAIT" invalid number of wait states specified
 11h	"BAD_WINDOW" nonexistent window specified
 12h	"BAD_WRITE" unable to complete request
 13h	"NO_ADAPTERS" no adapters installed, but Socket Services is present
 14h	"NO_CARD" no card in socket
 15h	function not supported
 16h	invalid mode
 17h	invalid speed
 18h	busy