INT 21 - Novell NetWare v3+ - CONVERT PATH TO DIRECTORY ENTRY                   
	AX = F217h subfn F4h
	CX = length of request buffer in bytes
	DX = length of reply buffer in bytes
	DS:SI -> request buffer (see #02271)
	ES:DI -> reply buffer (see #02272)
Return: AX = status (see #02860 at INT 2F/AX=7A20h/BX=0000h)
	reply buffer filled
SeeAlso: AX=F217h/SF=F3h


Format of NetWare "Convert Path to Directory Entry" request packet:
Offset	Size	Description	(Table 02271)
 00h	WORD	length of following data
 02h	BYTE	F4h (subfunction "Convert Path to Directory Entry")
 03h	BYTE	directory handle or 00h for none
 04h	BYTE	length of directory path
 05h  N BYTEs	directory path (must be fully qualified if no handle specified)
SeeAlso: #02272


Format of NetWare "Convert Path to Directory Entry" reply packet:
Offset	Size	Description	(Table 02272)
 00h	BYTE	volume number
 01h	DWORDDoubleword; four bytes.	 Commonly used to hold a 32-bit segment:offset or selector:offset address.	directory entry number
SeeAlso: #02271