INT 21 - Novell NetWare - GET VOLUME EXTENDED INFORMATION AX = F217h subfn F6h CX = length of request buffer in bytes DX = length of reply buffer in bytes DS:SI -> request buffer (see #02275) ES:DI -> reply buffer (see #02276) Return: AX = status (see #02860 at INT 2F/AX=7A20h/BX=0000h) SeeAlso: AH=F2h"Novell",AX=F217h/SF=E8h Format of NetWare "Get Volume Extended Information" request packet: Offset Size Description (Table 02275) 00h WORD length of following data 02h BYTE F6h (subfunction "Get Volume Extended Information") 03h BYTE volume number 04h BYTE size of reply buffer SeeAlso: #02276 Format of NetWare "Get Volume Extended Information" reply packet: Offset Size Description (Table 02276) 00h DWORDDoubleword; four bytes. Commonly used to hold a 32-bit segment:offset or selector:offset address. system interval (up-time in clock ticks, wraps to 0 on reaching FFFFFFFFh) 04h BYTE volume number 05h BYTE logical drive number 06h WORD number of 512-byte sectors per disk block 08h DWORDDoubleword; four bytes. Commonly used to hold a 32-bit segment:offset or selector:offset address. starting block number of volume 0Ch WORD total number of disk blocks 0Eh WORD number of free disk blocks 10h WORD total number of directory entries 12h WORD number of available directory entries 14h WORD maximum directory entries ever used 16h BYTE flag: volume is hashed in memory if nonzero 17h BYTE flag: volume is cached if nonzero 18h BYTE flag: volume is removable if nonzero 19h BYTE flag: volume is mounted if nonzero 1Ah 16 BYTEs volume name (null-padded) SeeAlso: #02275