INT 15 - Advanced Power Management v1.0+ - SYSTEM STAND-BY AX = 5307h CX = 0001h BX = 0001h (device ID for all power-managed devices) Return: CF clear Notes: puts the entire system into stand-by mode; normally called in response to a System Stand-by Request notification after any necessary processing, but may also be invoked at the caller's discretion should not be called from within a hardware interrupt handler to avoid reentrance problems the stand-by state is typically exited on an interrupt SeeAlso: AX=4280h,AX=5307h/CX=0002h"SUSPEND",AX=5307h/CX=0003h,AX=530Bh