INT 2D - Burnout Plus v3.00 - GET STATE/CONTROL INFORMATION                     
	AL = 10h
	AH = AMISAlternate Multiplex Interrupt Specification multiplex number for Burnout Plus
Return: AL = 01h
	BX = Burnout Plus status (see #02579)
	CX = record of features loaded (see #02580)
	ES:DI -> Burnout Plus control structure (see #02581)
Program: Burnout Plus is a DOS screen saver from Cove Software
SeeAlso: INT 14/AX=AA01h,INT 2D"AMISAlternate Multiplex Interrupt Specification"
Index:	screen saver;Burnout Plus


Bitfields for Burnout Plus status:
Bit(s)	Description	(Table 02579)
 0	screen is blanked
 1	MS Windows is active (Burnout Plus deactivated)
 2-15	reserved


Bitfields for Burnout Plus features loaded/features enabled:
Bit(s)	Description	(Table 02580)
 0	mouse activity monitor
 1	passkey support
 2	password support
 3	continuous clear
 4	software blanking
 5	video activity monitor
 6	disk activity monitor
 7	activating keystroke suppression
SeeAlso: #02581


Format of Burnout Plus control structure:
Offset	Size	Description	(Table 02581)
 00h	BYTE	size of structure in bytes
 01h	WORD	Burnout Plus version
 03h	WORD	screen blanking reset count in clock ticks
 05h	WORD	current countdown value in clock ticks
 07h	BYTE	type of timeout specification
 08h	BYTE	instant-blank hotkey
 09h	WORD	extended status information (see #02582)
		the bits for password, passkey, and software blanking are
		  ignored and cannot be enabled or disabled externally
 0Bh	WORD	features enabled (see #02580)
Note:	all fields except the first two may be modified by external programs
	  to affect the operation of Burnout Plus
Index:	hotkeys;Burnout Plus


Bitfields for extended Burnout Plus status information:
Bit(s)	Description	(Table 02582)
 0	Burnout Plus disabled
 1	force screen to blank on next clock tick
 2	restore screen if currently blanked
 3-15	reserved
Note:	1 and 2 are automatically cleared by Burnout Plus after blanking
	  or restoring the screen
SeeAlso: #02581
                                                                                

INT 2D U - Screen Thief v1.00 - FREE HIGH MEMORY BUFFERS                        
	AL = 10h
	AH = AMISAlternate Multiplex Interrupt Specification multiplex number for Screen Thief
Return: nothing
Program: Screen Thief is a graphics screen grabber
Note:	releases any code and data stored in EMSsee Expanded Memory Specification, DOS UMBs, or XMSsee Extended Memory Specification UMBs, but
	  does not release the low-memory stub; this may be used to effect a
	  partial uninstall if INT 2D/AL=02h fails
SeeAlso: INT D8"Screen Thief"