INT 7F - Alloy NetWare Support Kit (ANSK) v2.2+ - INSTALLATION CHECK INT 7F - Alloy 386/MultiWare (MW386), Novell-Type Network Executive (NTNX) INT 7F - SBS WinRun 1.00 - TRANSMITTER ENTRY POINT INT 7F - Canon IXHND2 Scanner Interface INT 7F - DJGPP GO32.EXE DOS EXTENDER - RELOCATED IRQ7 INT 7F - YTERM - ??? {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} INT 7F - Non-dedicated NetWare 2.x File Server - ENTER CONSOLE MODE INT 7F - Telebit ACS SERIAL I/O INT 7F - CONVERGENT TECHNOLOGIES ClusterShare CTOS ACCESS VECTOR (CX=4354h) INT 7F - Halo88 - API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. INT 7F - G8BPQ v4.07+ - GET NODE/SWITCH VERSION AND DESCRIPTION (AH=00h) INT 7F - MultiLink Advanced v1.0+ - ENQUEUE SYSTEM RESOURCE (AH=00h) INT 7F - Alloy NTNX, MW386 - SEMAPHORE LOCK AND WAIT (AH=00h) INT 7F - G8BPQ v4.00+ - HOST MODE - SET APPLICATION FLAGS AND MASK (AH=01h) INT 7F - TIGA Communications Driver v2.05 - GET ENTRY POINTS (AH=01h) INT 7F - MultiLink Advanced v1.0+ - DEQUEUE SYSTEM RESOURCE (AH=01h) INT 7F - Alloy NTNX, MW386 - SEMAPHORE LOCK (AH=01h) INT 7F - HLLAPI (IBMInternational Busiuness MachinesInternational Busiuness Machines) A hardware, software and other service technology company founded in 1911. 3270 High-Level Language API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes.)/LLAPI (Rabbit Low Level API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes.) (AX=0104h/BX=0000h) INT 7F - IBMInternational Busiuness MachinesInternational Busiuness Machines) A hardware, software and other service technology company founded in 1911. XGA(Extended Graphics Array) Adapter Interface (XGAAIDOS.SYS) (AX=0105h) INT 7F - IBMInternational Busiuness MachinesInternational Busiuness Machines) A hardware, software and other service technology company founded in 1911. 8514/A Adapter Interface (HDILOAD.EXE) (AX=0105h) INT 7F - HDILOAD Mach32 Adapter Interface - UNINSTALL (AX=0106h) INT 7F - G8BPQ v4.00+ - HOST MODE - SEND FRAME (AH=02h) INT 7F - MultiLink Advanced v1.0+ - RELEASE CPU(Central Processing Unit) The microprocessor which executes programs on your computer. (AH=02h) INT 7F - Alloy NTNX, MW386 - RELEASE SEMAPHORE (AH=02h) INT 7F - Btrieve Multi-User - GIVE UP TIME??? (AX=0200h) INT 7F - G8BPQ v4.00+ - HOST MODE - RECEIVE FRAME (AH=03h) INT 7F - Alloy ANSK, NTNX, MW386 - GET USER NUMBER (AH=03h) INT 7F - G8BPQ v4.00+ - HOST MODE - GET STREAM STATUS (AH=04h) INT 7F - Alloy NTNX, MW386 - GET NUMBER OF USERS (AH=04h) INT 7F - G8BPQ v4.00+ - HOST MODE - ACKNOWLEDGE STREAM STATUS CHANGE (AH=05h) INT 7F - Alloy NTNX (Slave), MW386 - GET USER PARAMETERS (AH=05h) INT 7F - Alloy NTNX (Host) - LOCK/UNLOCK SYSTEM, SPOOLER CONTROL (AH=05h) INT 7F - G8BPQ v4.00+ - HOST MODE - SESSION CONTROL (AH=06h) INT 7F - Alloy NTNX (Slave) - ALLOCATE FREE CLUSTER ON SHARED DRIVE (AH=06h) INT 7F - Alloy NTNX (Host) - GET SHARED DRIVE INFO (AH=06h) INT 7F - G8BPQ v4.00+ - HOST MODE - GET BUFFER COUNTS FOR STREAM (AH=07h) INT 7F - Alloy NTNX, MW386 - GET LIST OF SHARED DRIVES (AH=07h) INT 7F - G8BPQ v4.00+ - HOST MODE - PORTIBM PC Portable (uses same BIOS as XT) CONTROL/INFORMATION (AH=08h) INT 7F - Alloy NTNX (Host) - GET INTERRUPT VECTORS (AH=08h) INT 7F - Alloy NTNX - SET MESSAGE DISPLAY TIMEOUT (AH=08h/CL=02h) INT 7F - Alloy NTNX - ENABLE/DISABLE MUD FILE CHECKING (AH=09h) INT 7F - G8BPQ - proposed addition - GET NODE/APPLICATION CALLSIGN AND ALIAS (AH=09h) INT 7F - MultiLink Advanced v1.0+ - SET TASK PRIORITY (AH=09h) INT 7F - Alloy NTNX - SWITCH HOST TO DEDICATED MODE (AH=09h/CL=02h) INT 7F - Alloy NTNX,MW386 - GET ALTERNATE INTERRUPT (AH=09h/CL=03h) INT 7F - MultiLink Advanced v1.0+ - SET KEYBOARD TEST STATUS (AH=0Ah) INT 7F - G8BPQ v4.00+ - HOST MODE - TRANSMIT RAW (KISS) FRAME (AH=0Ah) INT 7F - Alloy NTNX - GET SYSTEM FLAGS (AH=0Ah/CL=00h) INT 7F - G8BPQ v4.00+ - HOST MODE - RECEIVE TRACE (RAW DATA) FRAME (AH=0Bh) INT 7F - Alloy NTNX (Host) - SET/RESET GRAPHICS DOS ON SLAVE (AH=0Bh/CL=02h) INT 7F - G8BPQ v4.00+ - HOST MODE - UPDATE SWITCH INFORMATION (AH=0Ch) INT 7F - G8BPQ v4.07+ - HOST MODE - ALLOCATE/DEALLOCATE STREAM (AH=0Dh) INT 7F - G8BPQ v4.07+ - HOST MODE - GET AVAILABLE STREAM (AX=0D00h) INT 7F - G8BPQ v4.00+ - HOST MODE - GET TIME MARKER (AH=0Fh) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - OPEN CHANNEL (AH=10h/CL=00h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - CLOSE CHANNEL (AH=10h/CL=01h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - LOCK CHANNEL (AH=10h/CL=02h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - UNLOCK CHANNEL (AH=10h/CL=03h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - RELEASE BUFFER (AH=10h/CL=04h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - CLOSE ALL CHANNELS (AH=10h/CL=05h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - LOCK ALL OPEN CHANNELS (AH=10h/CL=06h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - UNLOCK ALL LOCKED IDLE CHANNELS (AH=10h/CL=07h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - LOCK MULTIPLE CHANNELS (AH=10h/CL=08h) INT 7F - Alloy NTNX, MW386 - CHANNEL CONTROL - UNLOCK MULTIPLE CHANNELS (AH=10h/CL=09h) INT 7F - Alloy NTNX, MW386 - SEND DATAGRAM (AH=11h) INT 7F - Alloy NTNX, MW386 - ACKNOWLEDGE DATAGRAM (AH=12h) INT 7F - TIGA Communications Driver v2.05 - UNINSTALL (AX=1234h) INT 7F - Alloy NTNX, MW386 - RESET USER DATAGRAMS (AH=13h/CL=00h) INT 7F - Alloy NTNX, MW386 - SET RECEIVE ISR (AH=14h/CL=00h) INT 7F - Alloy NTNX, MW386 - SET ACKNOWLEDGE ISR (AH=14h/CL=01h) INT 7F - Alloy NTNX, MW386 - SET CHANNEL BUFFER POINTER (AH=14h/CL=02h) INT 7F - Alloy NTNX, MW386 - GET RECEIVE ISR (AH=14h/CL=03h) INT 7F - Alloy NTNX, MW386 - GET ACKNOWLEDGE ISR (AH=14h/CL=04h) INT 7F - Alloy NTNX (Host), MW386 - GET BUSY POINTER (AH=14h/CL=05h) INT 7F - Alloy NTNX, MW386 - GET CHANNEL STATUS (AH=15h/CL=00h) INT 7F - Alloy NTNX, MW386 - GET NEXT FULL CHANNEL (AH=15h/CL=01h) INT 7F - Alloy NTNX, MW386 - GET MAXIMUM NUMBER OF CHANNELS (AH=15h/CL=02h) INT 7F - Alloy NTNX, MW386 - GET MAXIMUM PACKET SIZE (AH=15h/CL=03h) INT 7F - Alloy NTNX, MW386 - GET AND CLEAR ACKNOWLEDGE STATUS (AH=15h/CL=04h) INT 7F - Alloy NTNX, MW386 - DIRECT MEMORY TRANSFER (AH=16h) INT 7F - Alloy NTNX, MW386 - SEND MESSAGE OR COMMAND TO USER(S) (AH=21h) INT 7F - Alloy NTNX - GET MESSAGE (AH=22h) INT 7F - Alloy NTNX - ATTACH/RELEASE HOST PROCESSOR (AH=24h) INT 7F - Alloy NTNX, MW386 - ATTACH OR RELEASE DRIVE FOR LOW-LEVEL WRITE ACCESS (AH=24h) INT 7F - TIGA Communications Driver v2.05 - ??? (AX=2525h) INT 7F - Alloy ANSK, NTNX, MW386 - GET NETWORK EXECUTIVE VERSION (AH=25h/CL=00h) INT 7F - Alloy ANSK, NTNX, MW386 - GET NETWORK EXECUTIVE TYPE (AH=25h/CL=01h) INT 7F - Alloy NTNX - SET FILE I/O CHECKING LEVEL (AH=26h) INT 7F - Alloy NTNX, MW386 - GET NTNX FILE MODE (AH=26h/CL=00h) INT 7F - Alloy NTNX - CANCEL FLUSH ON WRITE (AH=26h/CL=06h) INT 7F - Alloy MW386 - GET PORTIBM PC Portable (uses same BIOS as XT) INFORMATION (AH=30h) INT 7F - Alloy MW386 v1.x only - CHECK PORTIBM PC Portable (uses same BIOS as XT) ASSIGNMENT (AH=31h) INT 7F - Alloy ANSK, NTNX (Slave) - DUMP STRING TO TERMINAL (AH=37h) INT 7F - Alloy NTNX (Host) - GET SEMAPHORE TABLE (AH=37h) INT 7F - Alloy NTNX (Slave), MW386 - SET NEW TERMINAL DRIVER (AH=38h) INT 7F - Alloy MW386 - SET TERMINAL DRIVER FOR ANOTHER USER (AH=39h) INT 7F - Alloy MW386 - GET TERMINAL PARAMETERS (AH=3Ah) INT 7F - Alloy MW386 - SET TERMINAL PARAMETERS (AH=3Bh) INT 7F - Alloy MW386 - ENABLE/DISABLE AUTOBAUD DETECT (AH=3Ch) INT 7F - Alloy MW386 - POSTsee Power-On Self-Test TERMINAL CONFIGURATION CHANGES (AH=3Dh) INT 7F - Alloy MW386 - LOCK SEMAPHORE FOR USER (AH=41h) INT 7F - Alloy NTNX - LOCK FILE FOR USER (AH=41h) INT 7F - Voyetra - AAPISG - API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} (AX=4150h/BH=C1h) INT 7F - Alloy MW386 - UNLOCK SEMAPHORE FOR USER (AH=42h) INT 7F - Alloy NTNX - UNLOCK FILE FOR USER (AH=42h) INT 7F - TIGA Communications Driver v2.05 - INSTALLATION CHECK (AX=4321h) INT 7F - Voyetra - VAPISG - API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} (AX=4331h/BH=C1h) INT 7F - Alloy MW386 v2+ - SET ERROR MODE (AH=4Eh/DX=4E58h) INT 7F - Alloy MW386 v2+ - SET FCBsee File Control Block MODE (AH=4Fh/DX=4E58h) INT 7F - TIGA Communications Driver v2.05 - ??? (AX=5555h) INT 7F - Voyetra Multimedia Player - VMP.EXE API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} (AX=564Dh/BH=C1h) INT 7F - Voyetra - VAPISG - API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. {undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.} (AX=5658h/BH=C1h) INT 7F - Alloy NTNX - ATTACH DEVICE FOR USER (AH=81h) INT 7F - Alloy NTNX - RELEASE DEVICE FOR USER (AH=82h) INT 7F - Alloy MW386 - GET USER NAME (AH=A0h) INT 7F - Alloy MW386 - GET MACHINE, USER, AND PROCESS NUMBER (AH=A1h) INT 7F - Alloy MW386 - GET USER PRIVILEGE LEVEL (AH=A2h) INT 7F - Alloy MW386 - GET USER LOGIN STATE (AH=A3h) INT 7F - Alloy MW386 - VERIFY USER PASSWORD (AH=A4h) INT 7F - Alloy MW386 - GET USER STATUS (AX=A500h) INT 7F - Alloy MW386 - SET USER STATUS (AX=A501h) INT 7F - IBMInternational Busiuness MachinesInternational Busiuness Machines) A hardware, software and other service technology company founded in 1911. 8516 Touch Screen Device DriverAn interface module between the device-independent portions of the operating system and an actual hardware device which converts device-independent requests into the actual sequence of device operations to perform the requested action. IO.SYS contains the standard, built-in MSDOS device drivers such as CON, COM1, AUX, PRN, etc. See also INT 21h Function 52h and INT 2Fh Function 0802h. - GET API(Application Program[ming] Interface) The defined set of calls which a program may make to interact with or request services of the operating system or environment under which it is running. Because the inputs and outputs of the calls are well-defined, a program using the API can continue using the identical calls even if the internal organization of the program providing the API changes. ENTRY (AX=ABCDh/BX=0000h) INT 7F - Alloy NTNX, MW386 - RELEASE ALL SEMAPHORES FOR USER (AH=B0h) INT 7F - Alloy NTNX, MW386 - RELEASE NORMAL SEMAPHORES FOR USER (AH=B1h) INT 7F - Alloy NTNX - RELEASE MESSAGES FOR USER (AH=B2h) INT 7F - Alloy NTNX - RELEASE FILES FOR USER (AH=B3h) INT 7F - Alloy NTNX - RELEASE DEVICES FOR USER (AH=B4h) INT 7F - Alloy MW386 - WRITE BYTE TO TERMINAL AUX PORTIBM PC Portable (uses same BIOS as XT) (AH=C3h) INT 7F - Alloy MW386 - CHANGE CONSOLE MODE (AH=C5h) INT 7F - Alloy MW386 - WRITE BYTE TO CONSOLE PORTIBM PC Portable (uses same BIOS as XT) (AH=C6h) INT 7F - Alloy MW386 - READ CONSOLE DATA BYTE (AH=C7h) INT 7F - Alloy MW386 - READ CONSOLE DATA INTO BUFFER (AH=C8h) INT 7F - Alloy NTNX - REBOOT USER PROCESSOR (AH=CFh) INT 7F - Alloy MW386 - RESET NETWORK EXECUTIVE (AH=D6h) INT 7F - Alloy MW386 - POSTsee Power-On Self-Test EVENT (AH=D7h) INT 7F - Alloy MW386 - FLUSH DISK BUFFERS (AH=D8h) INT 7F - Alloy MW386 v2+ - GET MW386 INVOCATION DRIVE (AH=DBh) INT 7F - Alloy MW386 - CREATE DOS TASK (AH=E0h) INT 7F - Alloy MW386 - GET DOS TASK PID FROM CREATE ID (AH=E1h) INT 7F - Alloy MW386 - SWITCH TO NEW DOS TASK (AH=E2h) INT 7F - Alloy MW386 - CHANGE NAME OF DOS TASK (AH=E3h) INT 7F - Alloy MW386 - GET TASK NAME FROM PROCESS NUMBER (AH=E4h) INT 7F - Alloy MW386 - GET PROCESS NUMBER FROM TASK NAME (AH=E5h) INT 7F - Alloy MW386 - GET NUMBER OF AVAILABLE USER TASKS (AH=E6h) INT 7F - Alloy MW386 - REMOVE DOS TASK (AH=E7h) INT 7F - Alloy MW386 - DOS TASK DELAY (AH=E8h) INT 7F - Alloy MW386 - RESTRICT DIRECTORY TO GROUP (AH=F0h) INT 7F - Alloy MW386 - ASSIGN DIRECTORY TO GROUP (AH=F1h) INT 7F - Alloy MW386 - READ RESTRICTED DIRECTORY ENTRY (AH=F2h) INT 7F - Alloy MW386 - READ RESTRICTED DIRECTORY ENTRY FOR GROUP (AH=F3h) INT 7F - Alloy MW386 - ASSIGN USER TO GROUP (AH=F8h/DH=00h) INT 7F - Alloy MW386 - REMOVE USER FROM GROUP (AH=F9h/DH=00h) INT 7F - Alloy MW386 - GET USER GROUP LIST (AH=FAh/DH=00h) INT 7F - Alloy MW386 - ASSIGN GROUP NAME (AH=FBh) INT 7F - Alloy MW386 - GET GROUP NAME (AH=FCh)