RBIL61 - DISABLE
INT 13 - DISK - GET DRIVE PARAMETERS (PCIBM PC,XT286IBM PC XT/286,CONVIBM Convertible,PSIBM PS/2, any model,ESDI(Enhanced Small Device Interface) A disk drive interface type which was briefly popular before IDE took over. An ESDI drive can transfer data between the drive and controller at 10, 15, or 20 megabits per second, which is faster than an MFM or RLL controller but slower than what is possible with an IDE or SCSI drive. See also IDE.,SCSI(Small Computer Systems Interface) A system-independent expansion bus typically used to connect hard disks, tape drives, and CD-ROMs to a computer. A host adapter connects the SCSI bus to the computer's own bus. See also ESDI, IDE.) {#idx8630}
INT 2F - HIMEM.SYS v2.77+ - GET EXTERNAL A20(Address line 20) The 80286 and higher CPUs allow addresses in real mode to extend slightly beyond the one megabyte mark, which causes an incompatibility with some older programs which expect such addresses to wrap back to the beginning of the address space. For complete compatibility with the 8088, newer machines thus contain circuitry which permits the twenty-first address line (A20) to be disabled. The CPU then effectively has only twenty address lines in real mode, just as the 8088 does, and addresses which would extend beyond the one megabyte mark wrap to the beginning of the address space. See also High Memory Area, Real Mode. HANDLER ADDRESS {callout or callback, undocumentedInformation about a product which is not publicly available from the manufacturer, and must be determined by reverse-engineering (disassembly, trial-and-error, etc.). Undocumented information tends to change -- often dramatically -- between successive revisions of a product, since the manufacturer has no obligation to maintain compatibility in behavior which is not explicitly stated.}
{#idx83749}{#idx83753}